Installation Video and Installer Contact

Installation

• Remember to clean the window/surface thoroughly. The best cleaning agent is Isopropyl alcohol to remove any grease film after normal cleaning. Available at stores like Matas. (Do not use household alcohol or cleaning benzine)
• Place the film with the paper facing outward on a wet surface. This way, you can easily remove the paper and then flip the film to position it correctly.
• Now spray both the exposed adhesive side of the film and the spot where the film will be mounted. You cannot spray too much soapy water.
• Then flip the film and apply it with the adhesive side to the surface.
• Scrape away the soapy water and bubbles from the center outwards.
• It may be necessary to smooth out edges 12-24 hours after installation. By then, the water will have evaporated, and the adhesive will work fully again. 


• The soapy water is mixed with about 10 drops of colorless dish soap in a spray bottle.